Install the driver as a DKMS module – this means that when updating the kernel, you do not have to manually recompile the driver for the new kernel version. Sed -i 's/^dkms build/ARCH=arm dkms build/' Makefile Sed -i 's/CONFIG_PLATFORM_ARM64_RPI = n/CONFIG_PLATFORM_ARM64_RPI = y/g' MakefileĪlso, if you get an error about an unrecognized command line parameter “-mgeneral-regs-only” (for example Raspbian Buster), you need to run the following commands: Sed -i 's/CONFIG_PLATFORM_ARM_RPI = n/CONFIG_PLATFORM_ARM_RPI = y/g' Makefileīut for RPI 3B+ and 4B, you will need to run the other commands below, they build the Arch ARM64 driver: Sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile Sudo apt install raspberrypi-kernel-headersĬhanges to the Makefile must be made to change the processor architecture. How to install rtl8812au driver in For Raspberry (RPI)

To remove a driver from your system, open a terminal in your source directory and run the following command: Run the following commands to install the rtl8812au driver. How to install rtl8812au driver in Debian, Linux Mint, Ubuntu The pikaur program is analogous to pacman, but for working with the AUR, it allows you to automatically install and update programs from the AUR. Start by installing the pikaur program according to the “ Automatic installation and update of AUR packages” article. How to install rtl8812au driver in Arch Linux, BlackArch On Kali Linux, you can do this with the command:Īfter installation, reboot your system or disconnect/reconnect the adapter. If you bought a dual-band (2.4GHz & 5.0GHz) adapter with RTL8812AU/21AU chipset, you need to install the rtl8812au driver. How to install the rtl8812au driver in Kali Linux This also needs to be considered when purchasing devices.

Also, some devices work only in one band by choice, others – in two bands at the same time.

In some cases, depending on the design of the device manufacturer's circuitry or firmware, one antenna can be used only for transmitting, and the other only for receiving. The RTL8812AU supports up to 2 antennas, and the Realtek RTL8814AU supports up to 4 antennas. The difference between the RTL8812AU and RTL8814AU chipsets is the ability to support a different number of antennas. They are especially loved by those who perform wireless security testing of Wi-Fi networks, since they are modern wireless adapters that support monitor mode and can perform wireless injections. The RTL8812AU chipset has the following W-Fi adapters: What is the chipset in Alfa AWUS036ACH and Alfa AWUS036AC See also: How to install Wi-Fi driver in Linux if the computer is offline

Realtek 8812 driver to arch linux